Sightmark sight

How To Zero In Your Sightmark Reflex Sight

Have you ever bought yourself a Sightmark Reflex Sighting, but do not know how to use it just yet?  If your answer is yes, then you came to the right place. We will try to give you some tips on how you can use this particular rifle implement without difficulty.

Initial Reminders

The first thing that you need to do is to ensure that you can read the product manual before anything else.  It has clear instructions on how to properly mount the rifle as well as the reflex sight. Once you have read the instructions, you will be able to understand your rifle sight more and learn how to use it without difficulty.

Secondly, you have to ensure that you can familiarize yourself with the different parts of the reflex sighting from Sightmark.  Some of these essential parts are as follows:

  • The windage and elevation
  • The field of view
  • The adjustable tools
  • Batteries
  • Brightness control
  • The weaver mount
  • The protective metal shield


Once you can familiarize yourself with these essential parts, you can then understand how it works to ensure that you can zero in your target with the red dot sooner rather than later.  However, before doing that you must first mount the sight on to your rifle without difficulty.

Here are some of the steps that you should follow to do so.

red dot sight picture

Learning How To Mount Your Sight Properly

Initially, you would have to make sure that you can install the batteries without difficulty.  You can refer to the manual as well for the right steps.

The next thing that you need to do is to make sure that you can mount your rifle without difficulty.  To do this effectively, you have to make sure that your firearm is always unloaded and that you can detach it from the weaver first.

The next step would be to release the quick-detach lever from the side of the mount.  After you have successfully detached it, you should gently pull it away from the sight.

After this, you can place the sight on to the mounting rail as you would want it to be positioned.  You do not have to worry about getting it right on target at first because you can quickly zero it in later.  Make sure that you please the sight 3 inches away from your eyes for a better view.

Now that you have placed the sight on top of the mountain rail, you can pull the lever away and let decide be fastened securely onto the mount itself.

Learning How To Zero It In

Zeroing in your target means positioning your red dot accurately so much so that you will be able to get your aim right as you shoot it.  Here are some of the steps that you should follow if you would like to learn how to zero your red dot using the Sightmark Reflex.

The Great Advantage

One advantage of using this Sightmark Reflex Sight is that it has an automatic lock mechanism that allows you to lock in your adjustments to the windage and elevation without difficulty.  This means that no matter what movements you make while trying to zero in your target, the settings will not change at all.

The Additional Steps

Here are some additional steps on how to use it properly.

Step 1: First, you have to adjust the reticle accordingly along with the brightness.  You can do the selection knob. Make sure that you change the intensity of the brightness accordingly so that you would be comfortable using it even at night.

Step 2: After you have adjusted the brightness, the next step would be to rest your rifle onto a stable support platform.  Preferably, you can do this with a metal table top.

Step 3: Mount the sight accordingly, and you can start with the target practice after.  You should aim your rifle at about 50 to 100 yards away from your designated target.  All conditions should be similarly calibrated within the machine itself for maximum performance and aim.

Step 4: Do not forget to fire test shots first before anything else.  This way, you can be sure that you were able to set up your red dot sights as well as your rifle with as much accuracy as possible.

Step 5: You can adjust the reticle accordingly by changing the settings for the windage as well as the elevation whenever necessary.  You can continue making these adjustments until you reach the right angle for your targets.

red dot sight

Additional Information

On Storage

You have to make sure that you reflex sight from Sightmark is always attached to the rifle before putting it in storage.  In addition to this, do not forget to turn it off. The intensity level should be turned down to zero at all times when not in use.

Cover the sight using that cover that is included in the package.

As an additional reminder, you should make sure that the reflex sight, as well as the batteries, are removed from the rifle itself if the gun is going to be stored for more extended periods.  This will ensure not only your safety but also of those around you.

On Maintenance

Clean the body of your rifle reflex sight with a soft cloth.  Use a lens cleaning solution for the lenses. Make sure to blow on the lenses first before you wipe it down with a cleaning solution.  You can also use just pure water when cleaning the body.


These are just some of the many significant pieces of information that you ought to keep in mind before using and zeroing in your reflex sight from Sightmark.  It is always important to make sure that you follow instructions when using any sights.

This way, you can ensure that you remain safe while enjoying your very own rifle sight whenever you want.  Do not hesitate to contact the manufacturer for any other questions regarding how to use this Sightmark rifle reflex sights.

Their online personnel will be there to help you out with any questions that you might have for sure.

Leave a Comment